'Top 4 Best Cold Air Intakes for Toyota Tundra | Complete Buying Guide (2020) - Trucks Enthusiasts

Top 4 Best Cold Air Intakes for Toyota Tundra | Complete Buying Guide (2020)

106
Top 4 Best Cold Air Intakes for Toyota Tundra | Complete Buying Guide (2020)
9
Increase horsepower and Torque gain
Increase engine efficiency
Best Buy for Buck
Top Picks
SaveSavedRemoved 1

Table of Contents

Are you sucks up with your truck performance and wants to upgrade the mods?

If yes!

Then you must be at right place to boost up the performance level of your truck.

Let me tell you how?

Here we talking about the Air intakes.. yes the Air intakes -that replaces your truck’s stock air intake kit and gives you the monster gain in HP , torque and somewhat MPGs.

Before starting let’s us first know what does the Air Intake Systems do?

Also Check : 3 Best Mods/Upgrades for Toyota Tundra to boost performance | Buying Guide

Cold Air Intake are basically used to improve performance – this is not the new thing as everyone knows but how ?

Cold Air intake provides improved combustion rate by drawing in more colder air. There are many flow restrictions by means of tubes , bends and turns that basically slower down the incoming air for combustion with time. More restrictions means more resistance and temperature and less air or oxygen delivered to combustion chamber causing a poor ignition of fuel rich air/fuel mixture. This leads to decrease in performance with time.

Cold air Intake system is designed to free up those restrictions and drawing in colder air or more oxygen and maximizing combustion in your engine and hence increasing performance of your truck.

Benefits of Using Cold Air Intake

#1 Power/Hp Gain : This is one of the most obvious benefits of using Cold Air intake in your vehicle. More air or oxygen means good combustion which allows good fuel rich air/fuel mixture to ignite properly hence increasing horsepower of your vehicle.

#2 Increased Throttle Response : With the time you will come to find that your vehicle will be performing bit slow and lagging in the performance during tough paths. By increasing air flow and combustion in your engine you will be adding more throttle response to your vehicle. As performance air intakes gives your vehicle more throttle response whenever you press gas pedal.

#3 Boosted Mileage or Fuel economy : By using performance cold air intake you are basically increasing your gas mileage. As better oxygen level means better combustion and rick fuel/air mixture will burn properly and you get more energy out of every drop of fuel hence increasing mileage.

You will see 1-2 Miles per gallon increase in your mileage but along with this you have to maintain your driving habits also as in if you’re driving hard using extra power and acceleration that will surely not lead to increase in mileage. So be cautious about that.

#4 Increase Engine Life: Installing a cold intake will increase your engine’s life. As good combustion and cold air means less contaminants accumulated inside engine that leads to better engine life.

#5 Easy Installation : The best part of Performance Air Intake is that they’re very easy to install with simple tools and installation instructions. If you’re totally new then mechanic help is recommended otherwise you can install by seeing videos or reading installation manual also.

After knowing all of the benefits lets look into some of the things to consider before buying cold Air Intake

Important Things to Consider

back to menu ↑

Things to Consider before Buying Cold Air Intake

#1 Filter: This is important to evaluate the quality of filter before buying the cold air intake as it is the important part. It should be reusable and washable. In this way it will last longer and saves your money also as there is no need of replacement just clean it and use it again.

#2 Size: Choose the right size according to your truck. Just look at the engine space and also look into some details regarding size while buying Cold Air Intake. You have to choose wisely which one fit easier and will not compromise with any of the above benefits.

#3 Durability: Evaluate properly the material of the cold air intake before buying. Choose that air intake which will prone to wear and tear and will last long and made from high quality material.

#4 Price: Price is obvious the main thing to consider as everyone wants to buy cheap and best but don’t compromise with quality and performance with price.And after all with best air intake you will be saving indirectly (on fuel mileage).

#5 Style of Cold air intake : The other thing to think about is the style or type of cold air intake system. There are generally three types : the short ram system , Ram Air intake and the true cold air intake system.

Short RAM Intake VS True Cold Air Intake

  • Short ram system: The short ram is basically replace your factory intake with a new smooth pipe and an open element air filter .It draws air from inside the engine bay but give a short, smooth path to the engine.It is easy to install and cheaper than cold air intake.Since it takes place as your factory pipe so it allows for engine heat to have an easier path into your intake system, creating less horsepower and torque as compared to cold air intake. Its design tends to require less “plumbing” or fabrication work.
  • True cold air intake: Whereas Cold Air intake or The “true” cold air intake  places an emphasis on moving the air filter as far forward as possible. It draws air from outside the engine bay to give engine cooler and denser air. It produces more supplemental cold air flow than the short ram design. Due to the intake having more piping, the cold air is usually more expensive, and more difficult to install.
  • Ram Air Intake: The Ram Air Intake is pretty much similar like cold air intake only the difference is – it comes with longer tubes and air filter at the back of system. This is more beneficial during high speeds as it draws larger volume of air with wind pressure which results in more engine power.It is somewhat like turbocharger but with less parts.

It’s depend upon you which air intake you want to buy, if you’re ready to spend money and want noticeable performance and horsepower increase then Cold Air intake is best.On the other side if you don’t want to spend much and want good economy increase along with better throttle response then you should go with Short ram intake.

These are some of the points you should keep in mind before buying Cold Air Intake. If you have any doubt fell free to comment below.

You’ll find plenty of options from internet to buy the Air intake kit but it’s difficult for you to choose the best air intake .

Solving this issue we’ve listed the top 5 best and most rated cold air intakes for Toyota Tundra trucks that not only adds Hp and torque but also increases Miles per gallon.

So without wasting time let’s start our list!

Here we Go!

back to menu ↑

Best Cold Air Intakes for Toyota Tundra


#4 Genuine Toyota Parts PTR03-34100 TRD Cold Air Intake System for Select Sequoia and Tundra Models

Cold Air intakes are meant to drive colder air to engine resulting in performance increase and boosting of more hp and torque of your truck.

The TRD performance air intake also do the same work driving more denser air to your engine from behind and below the headlight area and results in more horsepower and torque.

SO if you don’t want to buy the other customize Cold Air intake but willing to boost your truck’s hp and torque then the Genuine Toyota Parts PTR03-34100 TRD Cold Air Intake is your best buy for buck.

The TRD Performance air Intake replaces the upper half of the stock air box, air filter and inlet hose assembly and features a unique Intake Flow Accelerator (IFA) that will boost the performance of the truck.

It also comes with injection-molded, large volume upper air box and reusable TRD high flow conical air filter that drive colder and denser air to your engine from behind and below the headlight area rather than hot air from the engine compartment.

The TRD performance air intake is designed to work with the factory ECU and emissions system so no need to buy new ECU.

Thanks to its high flow conical air filter that comes with a custom-calibrated filter service gauge that provides visual indication of when filter needs servicing so in this way you can easily increase the life of the air filter by servicing it on time.

The air intake if Dyno-tested to deliver an increase in both horsepower and torque for superior acceleration and greater pulling power.

Emission legal in all 50 states this TRD performance is strictly designed according to Toyota stringent performance standards.

Check out Customer Reviews and Ratings

Key Features

  • Custom Made for Tundra Models
  • Designed to work with the factory ECU and emissions system
  • Features reusable TRD high flow conical air filter with a custom-calibrated filter service gauge that provides visual indication of when filter needs servicing
  • Dyno-tested to deliver an increase in both hp and torque
  • Tested according to Toyota Stringent performance standards
  • Emission legal in all 50 states.

Check Genuine Toyota Parts Cold Air Intake for All Toyota Tundra MODELS

Pros
  • Increase HP and torque
  • outflows factory intake 
  • Comes with unique Intake Flow Accelerator (IFA) 
  • Reusable air filter- Comes with perfect fit 

Cons
  • Check Fit for your model before buying
  • Not too much performance increase


#3 S&B Filters 75-5039 Cold Air Intake Kit for 2007-2019 Toyota Tundra/Sequoia 4.6L & 5.7L (Cotton Cleanable Filter)

Make your Intake system running more cool and increase your vehicle’ performance with the S&B Filters Cold Air Intake System.

Talking about the manufacturer – S&B Filters has been making high performance air filters and breathers for vehicles and other custom applications. From its humble beginnings in a garage in Ontario, California, S&B has continually strive to design and manufacture the highest quality and most durable re-chargeable air filter in the industry.

Adding cool air in your engine the S&B filters air intake system increases the horsepower, torque and fuel economy of your engine.

With the superior design and quality the S&B cold air intakes feature a premium dry filter that allows 51.51% more airflow than stock intake.

Street legal in all US States it is 99.32% efficient @ 451 CFM. This kit comes with a massive, highly-efficient air filter which results in better performance and protects your engine.

This intake comes with a huge filter, but we did not stop there. An inverted filter in the top, known as a Powerstack, was added to increase the capacity of the filter. The result is better performance as the filter loads with dirt.

The S&B Filter is Available in either 8-layer Cotton Cleanable or Dry Extendable media.

This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.

You can install your S&B Air Intake system in just 30 minutes with the easy to use installation instruction and illustrations. It comes with an integrated bracket makes for a seamless attachment to the frame of your Tundra.

The S&B Air Intake system is backed up an 1,000,000 mile warranty.

Check out Customer Reviews & Ratings

Key Features

  • Made for 2007-19 Toyota Tundra/Sequoia 4.6L & 5.7L (Cotton Cleanable filter)
  • Get off the liner quicker with increased air flow
  • Uses very square inch of the engine compartment to give you oxygen-rich airflow.
  • S&B Cold Air Intakes also help balance air/fuel ratios that improve your gas mileage
  • Bolts directly on to the side of the truck eliminating the need for the stock mounting rack and creating the most solid mounting point imaginable
  • Increase air flow by lowering restrictions
  • Comes with active monitoring light
  • Backed by 1,000,000 Mile warranty

You can also replace your S&B Filter > See Here

Pros
  • Engine Efficiency Rating up to 99.32%
  • outflows with 51.51% More Airflow
  • Oiled Washable and Reusable filter 
  • Heat Shield plus gives better throttle response & Engine sound

Cons
  • Check Fit for your model before buying
  • Always check for the proper hardware and installation instruction otherwise you will face fitting issues


#2 aFe Power Magnum FORCE 51-81172 Toyota Tundra Performance Intake System (Dry, 3-Layer Filter)

Outflow your Vehicle stock intake with the aFe Power Magnum Force Performance Intake System.

Depending on the performance needs of your engine, aFe replaces restrictive stock parts with custom- tuned components. Most kits include an aFe performance filter of your choice and all come with a powder-coated steel heat shield to keep the air flow cool.

Actually it works in two stages-First it replaces factory air box and air filter and then it replaces factory air box, air box and intake tube.

This Stage-2 Sealed Intake produces 19 hp and 27 lbs. x ft. torque and outflows the factory intake by 50%.

And some kits actually replace the entire stock intake system. You’ll get maximum flow rate and most efficient air intake possible and monster gains up to 19 HP.

What more your need!

Fully enclosed in a molded plastic housing; this air intake system features a washable/reusable conical air filter that improves airflow for increased horsepower and torque.

The housing features auxiliary inlet duct for increased air volume as well as an attractive brushed aluminum cover that provides ready access to the filter for servicing.

This intake system also features a heat-insulating molded plastic tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance.

Improving performance by boosting hp and throttle response this air intake comes with a hasle-free installation.

The filter is constructed with 100% polyurethane for long life and multiple cleaning cycles.

The aFe air intake system Is backed by lifetime warranty.

This product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.

Check out Customer Reviews & Ratings

Key Features

  • Outflows the factory intake by up to 50 percent . Produces an additional 19 horsepower and 27 lbs. x ft. torque
  • 3-Layer non-oiled, washable/reusable conical air filter for the perfect balance of performance, protection and convenience
  • Features a powder-coated one piece heat shield and 3-angle adaptor
  • Huge 5-1/2″ conical Pro DRY S performance air filter for maximum flow.
  • Replaces air box, air filter and air intake tube
  • Install in just 30 min
  • Backed by lifetime warranty

Check aFe Power Cold Air Intake system for All TOYOTA TUNDRA Models 

Pros
  • Increase 19 HP & 27 lbs. x ft. torque gains.
  • outflows factory intake by by 50%
  • 3-Layer non-oiled Washable filter 
  • Heat Shield plus gives better throttle response & Engine sound

Cons
  • Check Fit for your model before buying
  • Always check for the proper hardware and installation instruction otherwise you will face fitting issues


#1 K&N Performance Cold Air Intake Kit 77-9036KP with Lifetime Filter for Toyota Tundra 5.7L V8

Wait for the First position is over- K&N Performance Cold Air Intake Kit stands at #1 Position in our list of Top 4 best Air Intake kits.

Whether to Haul ,tow or climb the stoop the K&N Performance Cold Air Intake Kit is your best bet to boost up your performance level of your truck.

Before moving forward let’s take a look on manufacturer- K&N Engineering, of Riverside, California, is the inventor and leading innovator of reusable cotton gauze filter technology for automotive applications.

K&N exists as both the sales and brand leader for performance filters, and maintains a stocking catalogue of over 3,500 part numbers, including an extensive line of both factory replacement drop-in filters, FIPK (Fuel Injection Performance Kit) applications, and its line of innovative Performance Gold oil filters.

Built for performance and show utilizing the highest quality components, the K&N 77 Series High-Flow Performance Air Intake is a free-flowing mandrel-bent aluminum tube induction system designed for Trucks and Sport Utility Vehicles

K&N intake systems replace your vehicle’s restrictive factory air filter and air intake housing.

K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow.

This allows your vehicle’s engine to inhale a larger amount of air than the OEM air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range.

The 77-9036KP air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain.

The intake tube has an attractive black powder-coated finish that’s made to last and it accommodates the factory crank case vent hose, inlet air temperature sensor and humidity sensor.

The filters on these kits are washable and reusable. Moreover it’s also packed with a custom heat shield and dynamic filterchager cotton-gauze filter.

Most of the intake kits are relatively easy to install using tools commonly available (see installation instructions).

77-Series air intakes come with K&N’s Million Mile Limited Warranty and install in less than 90 minutes.

Check out Customer Reviews & Ratings

Key Features

  • Made for 2012-2019 Toyota Tundra 5.7L V8
  • Outburst the flow rate
  • Guaranteed to increase horsepower
  • Designed to improve throttle response and engine sound
  • Feature an chrome topped K&N high-flow air filter and a heat shield
  • Easy to install, usually in 90 minutes or less
  • Replaces entire factory air intake system
  • Provided with washable and reusable filters
  • Lasts up to 100,000 miles before service is required (depending on driving conditions)
Pros
  • Increase  7.18 HP at 5490 RPM
  • outflows the flow rate
  • Comes with Washable and Reusable filter 
  • Heat Shield plus gives better throttle response & Engine sound

Cons
  • Check Fit for your model before buying
  • Always check for the proper hardware and installation instruction otherwise you will face fitting issues


back to menu ↑

What are the Indicators of Bad or faulty cold Air Intake?

These are the three symptoms or indicators that will alert you that your Cold Air intake in not functioning properly.

Bad or Faulty Air intake

Bad or Faulty Air intake

1.Reduction in Engine Performance

This is one of the most common indicator that will alert you that something is not good with cold Air Intake. Mostly over the time, the air filter gets clogged or become dirty that will result in reduction in power, accelerations and mileage. You will also experience problems while starting the vehicle that something is stuck and starting will become not smooth as before.

2. Excessively High Idle

The another indicator or alert you may get with the faulty Cold Air intake is an excessively high idle. Faulty cold air intake is not only the factor for high idle but this is one of the potential indicator. High Idle in this case is a symptom of vacuum leak. Most of the cold air intake systems come with vacuum ports to accommodate the original manufacturers vacuum routing. If the hoses on these ports or the ports will break that will lead to a vacuum leak and will cause excessively high idle.

3. Check Engine Lights

If the sensors installed in the cold air intake detects any issues, then it will set the Engine light on that will be the sign of something bad with the cold air intake whether it was vacuum leak or any faulty sensors. You can check the Engine light with Engine light reader also. Those sensors installed in the intake are specially designed to detect any problem and let your alert about the same.

back to menu ↑

Important things to consider for long life of Cold Air Intake – Expert Tips

Here are some expert tips and important things to consider for longer life of Cold Air intake. Here we mentioned only the names to Read full tips >> Click Here

  1. Timely Maintenance : Always do regular checks and inspection and keep your air filters clean for longer life.
  2. Check for any Water Intake (or Ingestion) : Check for Any water ingestion in you Air intake system . Entering of water in intake system will lead to engine failure 
  3. Which one to Choose Dry or Oil Filter – Choose between the two according to your driving conditions.
  4. Keep the Air Box Cooler and Increase its efficiency Using Heat Shield – use thermal barrier for better efficiency of intake system
  5. CARB Approval – Your intake system must be CARB Approved.

back to menu ↑

Cold Air Intake Buying Guide – FAQs

Q.What is cold Air Intake?

Ans. A Cold air intake kit is replacement or aftermarket part that is designed to provide the engine with greater capacity of cooler air. Cold Air intake provides improved combustion rate by drawing in colder air. There are many flow restrictions by means of tubes, bends and turns that basically slower down the incoming air for combustion with time. More restrictions mean more resistance and temperature and less air or oxygen delivered to combustion chamber causing a poor ignition of fuel rich air/fuel mixture. This leads to decrease in performance with time.

Cold air Intake system is designed to free up those restrictions and drawing in colder air or more oxygen and maximizing combustion in your engine and hence increasing performance of your truck.

Q. Why Cold Air Intake is important for the engine?

Ans. Cold Air intake draws in cold and denser air to the engine which has high concentration of oxygen. This means better combustion and less fuel is needed to create the spark and run the engine which leads to better horsepower, torque and fuel economy. Moreover, it increases the efficiency of the engine also.

Q. Does cold Air intake make any difference in performance?

Ans. Yes, Cold Air Intake do make a difference in performance. Some manufacture claims as much as 20-30 HP increase. But you will easily get 15-20 increase in horsepower and noticeable economy increase. And, if you’re using other modifications also like better performance exhaust, Tuners or suspension then you will create a much more efficient system.

Q. How often should I replace my cold air intake filter?

Ans. It depends upon the type of air filter you’re using. If you’re using Oiled filter that is re-usable and will last longer than the dry filter. So, it depends upon your cold air intake system.

Q. How many types of Cold Air intakes are there And Which is better cold air intake or Short Ram?

Ans.There are generally three types : the short ram system , Ram Air intake and the true cold air intake system.

Short ram system: The short ram is basically replace your factory intake with a new smooth pipe and an open element air filter .It is easy to install and cheaper than cold air intake.Since it takes place as your factory pipe so it allows for engine heat to have an easier path into your intake system, creating less horsepower and torque as compared to cold air intake. Its design tends to require less “plumbing” or fabrication work.

True cold air intake: Whereas Cold Air intake or The “true” cold air intake  places an emphasis on moving the air filter as far forward as possible. It draws air from outside the engine bay to give engine cooler and denser air. It produces more supplemental cold air flow than the short ram design. Due to the intake having more piping, the cold air is usually more expensive, and more difficult to install.

Ram Air Intake: The Ram Air Intake is pretty much similar like cold air intake only the difference is – it comes with longer tubes and air filter at the back of system. This is more beneficial during high speeds as it draws larger volume of air with wind pressure which results in more engine power. It is somewhat like turbocharger but with less parts.

It’s depend upon you which air intake you want to buy, as from the name Short Ram intake provides short path which results in better throttle response. Moreover, it draws air from inside the engine bay which is much warmer and better for complete combustion of fuel which means short ram intakes gives better gas mileage also than cold air intake.

Whereas on the other hand Cold Air intake draws in cold and denser air that means more oxygen available for combustion which leads to more power. On the other hand, sometimes Short Ram intake gets issue like its intake pipe gets heated up due to engine heat- for that you need heat shield installed in the Short Ram Intake.

Q. Does a cold air intake damage your engine?

Ans. There is a bigger concern with air intake to your vehicle – that is hydrolocking or hydrolock. It is the condition in which engine takes in water instead of air, causing engine damage. As water gets trapped in the cylinder of the engine and it doesn’t compress also which can ruin the pistons and cause connecting rods to bend and damage the engine. But this is very rare case nowadays.

This have happened in past but now it’s very rare thing to happen as now the cold air intake comes with air bypass valve installed in the middle of the cold air intake. The high pressure of bypass valve would not allow water to engine your engine.  The other option is you can choose short ram intake, so there is no option for hydro-lock.

We recommend if you’re living in area where the raining is very common than you should choose short ram intake.

Q. How Much a good cold air intake cost?

Ans. Changing from your vehicle’s intake system to Cold Air Intake system will cost around $150 to $550, depending upon the system. The cost is worth it actually , as you will save on fuel and your engine will get more power and better working.

Q. Why my cold intake pipe becomes very hot or what is heat Soak?

Ans. If your intake pipe is becoming hot very frequently then this is condition of heat soak in which the intake pipe itself heats up and it also increase the temperature of air going into your engine, decreasing engine performance. This is the issue usually with low grade air intakes. A good intake system is made from material such as aluminium that doesn’t allow the piping to get hot enough to effect performance.

Q. Does you need any tune with a cold air Intake?

Ans. Cold Air intake itself is best option to get more power and better mileage. Whereas if you want more advanced modifications then you should go with Tuners or Programmers, performance Exhausts, Suspensions and in trucks tonneau covers for better overall efficiency.

Q. Why some air intakes are cheaper than the others? If this really makes any difference?

Ans. First of all it totally depends upon your budget and system, which one you have to choose. But choosing cheaper one does not gives you that performance like the normal air intake. The cheaper air intakes usually come with simple design with a pipe and cheap filter and there is no testing for proper air/fuel mixing resulting in poor performance whereas the best Air intake comes with proper design and testing that mix air and fuel in proper ratio for better combustion and efficiency.


Conclusion

We hope you enjoyed the article Top 4 Best Cold Air Intakes for Toyota Tundra | Best way to Boost Performance to its entire bits.

We do hope that this article helped you in making a definitive choice when it comes to choosing an Best Air Intake for your Toyota Tundra truck.

If it really helped you,We’ll be glad if you could share this article on social media services like Google+,Twitter,linkedin,Stumple Upon and Facebook using the Sharing buttons on the Top and End of this articles.

If you have any query Feel free to add you thoughts in the comment section below.

We’ll happy to know your views.Do expect a quick reply.

Stay tunned for more updates.Thank You.

Sources : Top 5 Maintenance Tips for Cold Air intake(AutoAnything) , Symptoms of Bad or Failing Cold Air Intake  (AutoBlog)

9 Total Score
Best Performance Cold Air intakes for Tundra

Price
9.5
Quality
9
Performance Increase
8.5
PROS
  • Increase horsepower and Torque gain
  • Increase engine efficiency
  • Best Buy for Buck
  • Top Picks
User Rating: Be the first one!

We will be happy to hear your thoughts

      Leave a reply

      Trucks Enthusiasts
      Logo
      Enable registration in settings - general