3 Best Mods/Upgrades for Toyota Tundra to boost performance | Buying Guide
- Best Buy for buck
- Top Pick
- Boost next level performance
- Top rated
Are You in search of best performance upgrades for your Toyota Tundra truck?
Then you landed at right place.
Here in this article you will find the Top 3 Best Mods + addiitonal upgrades that will helps you in boosting your Toyota Tundra Truck’s performance level.
After reading this article you will be ready with the combination of 3 Best Mods that will shoots the horsepower, torque and MPGs while maintaining the engine sound and looks of your truck.
This list is totally based upon our research and customer reviews. If you want to add any other mod in this list, Feel free to comment we will add that in this list later on.
If you’re Interested : Top Rated Best Truck bed tents- Buying Guide
So without wasting much time let’s start our list of 3 Best Mods/Upgrades that will boost the performance level of Toyota Tundra.
Here we go!
#3 Cold Air intake Upgrade with aFe Power Magnum FORCE 51-81172 (Adds up to 19+ HP and 27+ ft-lbs Torque)
Cold Air intake plays a important role in vehicle performance level.
Basically the purpose of Air Intake is to deliver right amount of air into engine. Cold air intake sucked cold air and mix it with fuel, burnt and exhausted. And as the density of cold air is much higher than of hot air, cold air brings more oxygen and makes more power.
You will see improved performance with more horsepower, acceleration and gas mileage along with good sound by using cold air intake in your vehicle.
Now moving towards our First mod and one of the best air intake that Outflow your Vehicle stock intake is the aFe Power Magnum Force Performance Intake System.
Depending on the performance needs of your engine, aFe replaces restrictive stock parts with custom- tuned components. Most kits include an aFe performance filter of your choice and all come with a powder-coated steel heat shield to keep the air flow cool.
Actually it works in two stages-First it replaces factory air box and air filter and then it replaces factory air box, air box and intake tube.
This Stage-2 Sealed Intake produces 19 hp and 27 lbs. x ft. torque and outflows the factory intake by 50%.
And some kits actually replace the entire stock intake system. You’ll get maximum flow rate and most efficient air intake possible and monster gains up to 19 HP.
What more your need!
Fully enclosed in a molded plastic housing; this air intake system features a washable/reusable conical air filter that improves airflow for increased horsepower and torque.
The housing features auxiliary inlet duct for increased air volume as well as an attractive brushed aluminum cover that provides ready access to the filter for servicing.
This intake system also features a heat-insulating molded plastic tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance.
Improving performance by boosting hp and throttle response this air intake comes with a hasle-free installation.
The filter is constructed with 100% polyurethane for long life and multiple cleaning cycles.
The aFe air intake system Is backed by lifetime warranty.
This product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.
- Outflows the factory intake by up to 50 percent . Produces an additional 19 horsepower and 27 lbs. x ft. torque
- 3-Layer non-oiled, washable/reusable conical air filter for the perfect balance of performance, protection and convenience
- Features a powder-coated one piece heat shield and 3-angle adaptor
- Huge 5-1/2″ conical Pro DRY S performance air filter for maximum flow.
- Replaces air box, air filter and air intake tube
- Install in just 30 min
- Backed by lifetime warranty
Programmer and Tuners are both designed to maximize your engine’s power output with easy plug n play installation. These will give your truck big boost in horsepower and torque along with helps your engine run more efficiently therefore increasing your MPGs.
While choosing tuner for your vehicle you need to determine exactly what kind of results you wants to achieve with your performance chip. Whether you want horsepower, torque and fuel economy or you want it as speed limiter, tire size, rev limit and also use it as checking and clearing diagnostic cods. All depends upon your need.
Boost the performance of your rig with all in one engine tuner, monitor, gauge and diagnostic device in a single unit.
Made to improve the utility of your vehicle, the GT tuner astoundingly increase horsepower along with the increase of fuel economy by providing a comprehensive set of monitoring features and diagnostic functions.
The tuner is designed to adjust and utilize multiple preloads and up to 10 custom tune files to specifically match with your vehicle and it’s performance needs.
You will also get fuel saving preloads that will be useful for long-haul and around town driving.
The installation part is quite quick and easy, it will hardly take 15 minutes to install with all the instructions provided.
Be very careful while installing other performance upgrades with this tuner as sometimes it won’t be perfectly combined with other mods and yield no results in the end.
Sometimes you might face issues while contacting Bully Dog as the customer service is not that perfect but they will contact you back after 1 or 2 attempts.
Comes with wide make & model fit- you can get all the support and assistance from the Bully Dog website.
- Made to Fit Multiple Make & Models
- Improve fuel economy along with increase in HP and Throttle Response
- Monitor over 15 Performance parameters
- Utilize up to 10 custom tunes as per vehicle’s need
- Diagnose and clear trouble code
- Engine tuner, monitor, gauge and diagnostic device all in a single unit.
- Easy and Quick Installation
- Comes with dynamic LCD display
#1 Exhaust upgrades with aFe Twisted Steel headers with Y pipes (Adding +33 Hp and +30 lbs x ft. of torque with Good Exhaust note)
Never chained down your beast with restrictive stock equipment. Rather set it free and unleashes every pinch of power it can pump out.
The best way to free your ride and experience the high-speed difference is to install aFe Twisted Steel Headers along with Y pipe.
aFe Twisted Steel heads basically are TIG or MIG- welded by certified craftsmen for race proven strength and durability. TIG-welding provides the strongest welds reducing stress cracks. aFe headers are designed to increase exhaust velocity and increase usable torque. This results in a more aggressive throttle response and increased passing power.
It is one of the best way and ultimate exhaust upgrade to boost performance level by adding astounding +30 horsepower and +33 lbs x ft. of torque.
Constructed out of 6-gauge, 1-3/4″ mandrel-bent 304 Stainless Steel for maximum durability, aFe Twisted Headers designed with 4-to-1 formed collectors which decreases turbulence and increases air velocity for improved air flow.
Each tube is cut to the optimal length for true pulse control technology and mandrel bent which improves flow by virtually eliminating all restrictions.
The tubes extend all the way down to the top of the flange and merged with Y-pipe that utilizes a mitered merge collector to eliminate dead space that can cause turbulence and hinder flow.
For a leak free fit, aFe Headers comes with high quality laser cut flanges and band clamps that are used for a complete all around sealing surface with no modification needed.
Manufactured in USA the performance header and y-pipe are backed by limited lifetime warranty and are designed to be a true bolt on system with no cutting or modifications required.
- aFe POWER 48-33002-YC Twisted Steel long header with Y-pipe is custom designed for Toyota Tundra 2007- Present models.
- Added an astounding +33 HP and +30 lbs. x ft. TQ (tested on a 2014 Toyota Tundra V8-5.7L).
- Free- Flowing and Restriction free large pipe designs
- True formed (headers) and mitered (y-pipe) merge collectors eliminate dead zones for improved flow
- 100% hand MIG-welded construction ensures optimal strength and durability
- Includes Dual, High-Flow, 400 CPSI Stainless Steel Catalytic Converters
- Incorporates high-Flow, 400 cell catalytic converters for improved flow
- Easy, no-hassle bolt on installation with no cutting or modification required.
- Street legal in 48 States
- Backed by lifetime warranty.
Others best Upgrades/Mods that will Also help you in Boosting Performance
Apart from above listed 3 best upgrades, there are other mods also that will also proves to be best combination and will surely helps in boosting the overall performance to next level.
Don’t just go with our words, try it and then know it yourself. It will sure that you will never regret after that..These modifications will improve the driviablity and performance in one way or other and are going to be best partner for your beast.
So, without wasting more time let’s move towards the bonus Upgrades.
An intercooler, or “charge-air cooler”, is an air-to-air or air-to-liquid heat exchange device used on turbocharged and supercharged (forced induction) internal combustion engines to improve their volumetric efficiency by increasing intake air-charge density through isochoric cooling.
Here we’re talking about heat exchanger which is basically a intercooler only. Basically, Heat Exchanger uses air from the atmosphere, flowing over and around a lot of finned tubes to remove heat from the intake air charge which means it reduce the temperature of the air that has been pressurized by the supercharger/turbocharger that is going through the intake tubes.
In layman terms, a heat exchanger is a device designed to efficiently transfer or “exchange” heat from one matter to another. When a fluid is used to transfer heat, the fluid could be a liquid, such as water or oil, or could be moving air.
When you use air-to- air heat exchanger, cooler air will be directed towards the tubes that will maximise the cooling effect and ultimately create impact on the performance of the vehicle.
So, upgrade your Tundra with universal fit Edelbrock HEAT EXCHANGER. You can choose as per your truck specification and other measurement details.
If you’re looking to improve drivability without putting any extra tuning mods, then The Sprint Booster is a perfect alternative for you!
The best thing about this upgrade is -you can easily use it with or without other tuners/programmers due to its ability to work independently from other modifications.
Basically Sprint Booster modifies the signal between the accelerator pedal module and the ECU. The improved signal encourages the throttle to open “more” than what the stock signal was providing at a given pedal position. The end result is the idle-to-full-throttle pedal travel is reduced.
Sprint Booster basically makes your truck “feel” more powerful because the given pedal input produces greater throttle opening.
Easy and quick installation, this performance mod is one of the perfect and effective upgradation for your truck.
Apart from these mods, there are other basic upgrades also that you can add in your list that will create noticeable increase in performance while increasing the life of your truck directly or indirectly.
We hope you enjoyed the article Top 3 Best Mods/upgrades to Boost Performance of Toyota Tundra | Best Combination to upgrade to its entire bits.
We do hope that this article helped you in making a definitive choice when it comes to upgrading your Toyota Tundra and unleashes every pinch of power.
If it really helped you,we’ll be glad if you could share this article on social media services like Google+,Twitter,linkedin,Stumple Upon and Facebook using the Sharing buttons on the Top and End of this articles.
If you have any query Feel free to add you thoughts in the comment section below.
We’ll happy to know your views.Do expect a quick reply.
Stay tunned for more updates.Thank You.