Top 3 Best Ways to Boost Performance Level of Toyota Tacoma | Top 3 Mods,Upgrades
Are You in search of best performance upgrades for your Toyota Tacoma truck?
Then you landed at right place.
Here in this article you will find the Top 3 Best Mods and upgrades that will helps you in boosting your Toyota Tacoma Truck’s performance level.
After reading this article you will be ready with the combination of 3 Best Mods that will shoots the horsepower, torque and MPGs while maintaining the engine sound and looks of your Toyota truck.
This list is totally based upon our research and customer reviews. If you want to add any other mod in this list, Feel free to comment we will add that in this list later on.
So without wasting much time let’s start our list of 3 Best Mods/Upgrades that will boost the performance level of Toyota Tacoma.
Here we go!
Outflow your engine flow rate with the K$N 77 series Performance Intake Kit.
Before moving forward let’s take a look on manufacturer- K&N Engineering, of Riverside, California, is the inventor and leading innovator of reusable cotton gauze filter technology for automotive applications.
K&N exists as both the sales and brand leader for performance filters, and maintains a stocking catalogue of over 3,500 part numbers, including an extensive line of both factory replacement drop-in filters, FIPK (Fuel Injection Performance Kit) applications, and its line of innovative Performance Gold oil filters.
You can also Choose from our List of top 5 Best Cold Air Intake for Toyota Tacoma to boost the Performance Level.
The K&N 63 Series Air Charger Intake Kits virtually eliminate restriction between the air filter and the engine by replacing the air filter and the entire air path to the engine in Toyota Tacoma models.
These intakes use only non-metallic rotationally molded tubes that can reduce intake air temperature and decrease intake sound over a metal tube.
The aerodynamically engineered tube drives a massive amount of air into the engine, which translates into power.
The K&N 63 Series Intake Kits are not legal for street use in California.
This air intake is relatively easy to install, usually in 90 minutes or less using your vehicle’s existing factory mounting points. The tools needed are a screwdriver and an Allen wrench.
The Air Intake is backed by 100,000 mile warranty.
- Guaranteed to Increase Horsepower and performance
- Designed to improve throttle response and engine sound
- Add up to 7.41 horsepower at 4600 RPM
- Comes with Largest posibile K&N Filtercharger cotton-gauze filter (washable & Reusable)
- Lasts up to 100,000 miles before service is required (depending on driving conditions)
- Replaces entire factory air intake system
- Easy installation with details instructions and a complete hardware kit
Enhance your truck performance and boost up horsepower by plugging in an Edge Evolution CTS2 Programmer.
If you’re not new to tuning industry then you must know about the Edge industries.
The company was founded on the premise that Edge Products would build modules that out-performed competitors’ “chips” by using more of the OEM ECM (computer) signals and improve performance by monitoring RPM, turbo boost pressure, timing and fueling parameters.
You can also see our list of 4 Best Tuners & Chips to Increase Mileage, Efficiency & Horsepower for Toyota Tacoma.
The main goal was to improve the vehicle’s efficiency while providing smooth power curves that far exceed stock power bands.
Now coming back to Edge Evolution CTS2 Programmer it reprograms your vehicle’s stock computer.
It resides in the cab with one simple cable connection to the OBDII (diagnostic) port. The Evolution is used to save the stock files from the vehicle’s computer and then upload the Edge calibrations into the vehicle’s computer.
This amazing product is available for both gas and diesel pickups and SUVs. It has low-profile design and comes with the extra-large 5’ high-res color touchscreen that is ample enough to monitor all your vital engine data and more.
This product comes with multiple power levels custom tuned by a whole team of engineers, and can be installed in minutes without ever popping the hood.
The Evolution CTS2 greatly increases horsepower and torque- depending upon your vehicle and other mods, the powerful tuner is capable of adding up to 180 hp and 440 ft-lbs of torque on diesels and up to 50 hp and 50 ft-lbs of torque for gas vehicles.
Not only does it re-tune your vehicle, it stays mounted in the cab and features real-time, monitoring of vital engine data.
- Unlocks every ounce of power with the powerful Edge Evolution CTS2 Programmer
- Boosted horsepower and Torque to great extent
- Custom–tuned power levels for shift points, shift firmness, torque management and fuel pressure
- Comes with large 5” high-resolution, full-color touchscreen gives you easy access
- Add up to 180 hp and 440 ft-lbs of torque on diesels & up to 50 hp and 50 ft-lbs of torque on gas
- Low-profile design easily adjusted in your truck
- stays mounted in the cab and features real-time, monitoring of vital engine data.
#1 Exhaust upgrades with aFe Twisted Steel headers with Y pipes (Adding +22 Hp and +29 lbs x ft. of torque with Good Exhaust note)
Never chained down your beast with restrictive stock equipment. Rather set it free and unleashes every pinch of power it can pump out.
The best way to free your ride and experience the high-speed difference is to install aFe Twisted Steel Headers along with Y pipe.
aFe Twisted Steel heads basically are TIG or MIG- welded by certified craftsmen for race proven strength and durability. TIG-welding provides the strongest welds reducing stress cracks. aFe headers are designed to increase exhaust velocity and increase usable torque. This results in a more aggressive throttle response and increased passing power.
It is one of the best way and ultimate exhaust upgrade to boost performance level by adding astounding +22 horsepower and +29 lbs x ft. of torque.
Constructed out of 16-gauge,1-5/8″ mandrel-bent 304 Stainless Steel for maximum durability, aFe Twisted Headers designed with 3-to-1 formed collectors which decreases turbulence and increases air velocity for improved air flow.
Each tube is cut to the optimal length for true pulse control technology and mandrel bent which improves flow by virtually eliminating all restrictions.
The tubes extend all the way down to the top of the flange and merged with Y-pipe that utilizes a mitered merge collector to eliminate dead space that can cause turbulence and hinder flow.This y-pipe is designed using 2-1/2″ into 3″ transition and it utilizes Dual high flow catalytic converters which gives maximum flow.
For a leak free fit, aFe Headers comes with high quality OE style 3/8″ to 1/2″ flanges and band clamps that are used for a complete all around sealing surface with no modification needed.
- aFe Power 48-46003-1YC Twisted Steel Header and Y-Pipe is custom designed for Toyota Tacoma.
- Added an astounding +22 horsepower and +29 lbs. x ft. of torque
- Free- Flowing and Restriction free large pipe designs
- True formed (headers) and mitered (y-pipe) merge collectors eliminate dead zones for improved flow
- 100% hand MIG-welded construction ensures optimal strength and durability
- Optimized tube lengths and 3/8″ thick CNC laser cut flanges
- Incorporates high-Flow, 400 cell catalytic converters for improved flow
- Easy, no-hassle bolt on installation with no cutting or modification required.
- Street legal in 48 States
- Backed by lifetime warranty.
We hope you enjoyed the article Top 3 Best Ways to Boost Performance Level of Toyota Tacoma | Top 3 Mods,Upgrades to its entire bits.
We do hope that this article helped you in making a definitive choice when it comes to upgrading your Toyota Tacoma and unleashes every pinch of its power.
If it really helped you,we’ll be glad if you could share this article on social media services like Google+,Twitter,linkedin,Stumple Upon and Facebook using the Sharing buttons on the Top and End of this articles.
If you have any query Feel free to add you thoughts in the comment section below.
We’ll happy to know your views.Do expect a quick reply.
Stay tunned for more updates.Thank You.